Highly sensitive passive vibration sensor & geofon GEO 10
Technical data
- Compatible with any Spectrum Analyzer or Oscilloscope brand
- Design: Vibrationsensor/Geofon
- Natural frequency: 8Hz
- Frequency range: 4Hz-1kHz (typ.)
- Sensitivity: 28.8 V/m/s
- Accuracy: +/-5%
- Typical spurious frequency: 160Hz
- Coil impedance: 375 Ohm
- Connector: SMA (m)
- Dimensions (D/H): 25.4x36mm
- Weight: 82g
- Warranty: 3 years
Application examples
Examples for possible analysis and measurements within frequency range (4Hz - 1kHz):
- Earth-Vibration
- Vibration of machines, electronic devices etc.
- Monitoring of level or vibration limits
Included in delivery
- Vibrationsensor GEO 10
- 1m SMA cable
Options
Currently there are no additional options available.
Accessories
Currently there are no additional accessories available.
Downloads
Ordersheet / Pricelist 
GEO 10
Vibrationsensor & Geofon for NF-5030 Spectrum Analyzer. Very sensitive and wide frequency range down to 4Hz. Perfect for monitoring machinery vibrations.
The highly sensitive vibration sensors of the Aaronia GEO series offer a surprisingly high sensitivity over a wide frequency range down to 10Hz (4Hz).
They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits.
In addition to regular monitoring, thanks to their high sensitivity, these probes can also be used as geophone to measure ground motion (displacement).
In conjunction with our SPECTRAN 5030 Spectrum Analyzer and our free analyzer-software "LCS" or "MCS", the entire frequency range between 10Hz (4Hz) and 1kHz can be analyzed, monitored and documented. Long-term recording for days or even weeks is not a problem at all, either.
These sensors are equipped with a 1m SMA cable (similar with the one used with our test-antennas), allowing direct connection to the high-sensitivity signal input of our NF-5030 EMC-Analyzer.
Made in Germany:
All Aaronia vibration sensors are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 3 year warranty for all GEO vibration sensors.