Active LogPer Antenna HyperLOG 60200 X up to 20GHz

Active Directional Antenna HyperLOG 6080 X with RF Preamplifier and optional Compass

Active Directional Antenna HyperLOG 6080 X with RF Preamplifier and optional Laser

Active Directional Antenna HyperLOG 6080 X with demounted RF Preamplifier

Included in delivery

  •  Active Directional Antenna HyperLOG 60200 X
  • Low Noise Preamplifier with integrated LiPo battery (3,5h run time)
  • International battery charger and power supply
  • Calibration data on EEprom (readout via USB)
  • Typical calibration data on CD
  • Large aluminum carrying case with foam protection
  • Pistol grip with mini tripod function
  • Aaronia SMA tool set with over-torque protection
  • SPECTRAN is NOT included

Application examples

 

Application areas to measure with the antenna:

  • GSM900 / GSM1800 / UMTS
  • GPS
  • DECT
  • Microwave
  • WiFi
  • HDMI
  • 2,4GHz / 5-6GHz WLan
  • directional radio
  • UWB (FB2-FB8)
  • WiMAX
  • etc.

Options

  • Option 501 (1mW Red Laser)

    Easy to connect on top of any HyperLOG X antenna. Including connector and all needed screws. Perfect for pinpointing any RF source within 100m range e.g. inside buildings.

  • Option 502 (Tactical 150mW Green Power-Laser)

    Extreme military grade. Easy to connect on top of any HyperLOG X antenna. Including connector and all needed screws. Perfect for pinpointing any RF source even at bright daylight. About 1000x times brighter than our standard 1mW red laser. Very high range up to 15 km.
    WARNING: Only for outside use. This is no toy! Please make sure that you are allowed to use and/or import this gadget before placing an order!

  • Option 510 (Small Compass Ball)

    Great gadget to localize a pinpointed RF source. Works at any antenna position due to its liquid filled ball. Can be used together with above mentioned laser or separately. Including connector and all needed screws.

  • Option 530 (Waterproof Housing)

    Protects the antenna against water intrusion. Perfect for outdoor use e.g. in the pouring rain. (+€ 49.95)

Accessories

  • 1m, 5m or 10m Low Loss SMA Cable

    High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.

  • SMA to N Adapter

    To connect any Spectrum Analyzer etc. with N connector to the HyperLOG antenna (Above SMA cable needed). You can find more details in our online shop.

  • Heavy Multifunctional Pistol Grip

    Highly recommended for the usage of our HyperLOG antennas: Quick and easy change of antenna polarization, perfect antenna handling (even with the more heavy HyperLOG 40xx and 30xxx series). A MUST-HAVE for any pro user. You can find more product details in our online shop.

  • Large Aluminum Tripod

    Height adjustable, high stability. HIGHLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas.You can find detailed information in our online shop.

Downloads

Aaronia HyperLOG connected to the preamp

Preamp of the Aaronia LogPer Antenna HyperLOG

Initiates file download
frequency range of the antenna
€ 1,998.00*
(680MHz - 20GHz)
loading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading images

Technical data

  • Compatible with any Spectrum Analyzer brand
  • Design: Active Logarithmic-Periodic
  • Frequency range: 680MHz - 20GHz
  • Nominal impedance: 50 Ohm
  • VSWR (typ.): <1:2,5
  • Gain (typ.): 19dBi
  • Antenna factor: see data sheet graph
  • RF connection: SMA socket or N socket using an adapter
  • Tripod connection: 1/4"
  • Interface: USB 2.0/1.1
  • Delivery with typical calibration data
  • Dimensions (L/W/D): 340x200x25 mm
  • Weight: 400gr
  • Warranty: 10 years

 

Highlights:

  • Ultra high gain for detecting even lowest RF sources
  • Integrated Low Noise Preamplifier incl. LiPo battery
  • Runs with battery or external power supply (included)
  • Integrated calibration data on EEprom (readout via USB)
  • Additional standard calibration data (on CD)
  • Special designed radome for perfect antenna protection
  • Gold coating for stable performance
  • Wide bandwidth 
  • Coverage of various mobile radio frequency ranges 
  • Suitable for field-strength and EMC measurements due to high precision 
  • Compact and sturdy design 
  • Can be used in the lab and for open-field application

 

HyperLOG 60200 X

 

The LogPer-antennas of the HyperLOG® 6000 X series are based on an ultra-thin, GOLD-COATED high tech TEFLON base.

 

Based on this high quality technology, the antenna-frequency-range could again be vastly extended compared to the 7000 X series.

 

Now the maximum bandwidth available reaches from 680MHz up to as far as 20GHz. Its small physical antenna-size and low weight make this antenna predestined for mobile use.

 

The 20GHz frequency range now also allows the detection of unusable signal sources like military radar, various satellite services, very high frequency bugs, etc.

 

Made in Germany:
All Aaronia directional antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all EMC antennas.

 

Included in delivery:
Each HyperLOG directional logper antenna will be shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".

Options:
All HyperLOG X (active) antennas can be equipped with various options which highly expand the functionality. More details about possible options for this HyperLOG are available at above section "Options".