Remote Controlled USB Spectrum Analyzer SPECTRAN HF-6060 V4 X
Technical data
- Frequency range: 10MHz to 6GHz
- DANL: -135dBm(1Hz)
- DANL with Preamp: -150dBm(1Hz)
- Max. power at RF input: +10dBm
- Lowest sample time: 10mS
- Resolution (RBW): 3kHz to 50MHz
- Units: dBm, dBµV, V/m, A/m, W/m²
dBµV/m, W/cm² etc. - Detectors: RMS, Min/Max
- Demodulator: AM, FM
- Input: 50 Ohm SMA RF-input (f)
- Accuracy: +/- 2dB (typ.)
- Interface: USB 2.0/1.1
- Dimensions (L/W/D): 210x136x26 mm
- Weight: 1600gr
- Warranty: 10 years
Highlights:
- Exposure limit calculation and display according to DIN/VDE 0848
- Up to 100x faster sample time as V3 units
- Up to 60dB higher sensitivity as V3 units
- Low noise preamplifier (option)
- 14Bit Dual-ADC
- DDC Hardware-Filter
- 150 MIPS DSP (CPU)
- Real-time remote control via USB
- Vector (I/Q) measurement
- Real-time Peak Power Detector (option)
- Internal speaker (which can be switched off)
- Audio out for the use of PC based FFT analyzer software
- Included OmniLOG antenna
- Very thick (3mm) aluminium housing offering very good screening.
- 100% powered by the external power supply only (no battery)
- Free MAC OS, Linux and Windows software
Application examples
Examples for possible analysis and measurements within frequency range (10MHz - 6GHz):
- Radio & TV
- Tetra/BOS
- ISM434
- LTE800
- ISM868
- GSM900
- GSM1800
- GSM1900
- DECT
- UMTS
- WLAN
- Microwave
- Bluetooth
- WiFi
- LTE2.6
- WiMAX
- Directional Radio
- 5GHz WLAN
- etc.
Included in delivery
- Remote controlled USB Spectrum Analyzer HF-6060 V4 X
- OmniLOG 90200 antenna
- Aluminum carrying case
- Battery charger and power supply incl. international adapter set
- USB cable
- SMA tool
- Cleaning brush
- Detailed English manual (on CD)
- Analyzer software for MAC OS, Linux and Windows (on CD)
Options
- Option 020 (15dB Low Noise Internal Preamplifier)
This option provides an internal, super low-noise 15dB preamplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a TRUE RF switch. There really is no excuse for not ordering this one, considering its very attractive price. The maximum sensitivity of the V4 series without option 020 is lower by 15dB.
- Option UBBV1, 40dB Low Noise External Broadband Preamplifier (1MHz-1GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.
- Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1kHz-8GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.
- Option 203 (6GHz Broadband Peak Power Meter for HF-6060 V4 (X))
This option expands your SPECTRAN with a Peak Power Meter with full 6GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also an perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm.
Accessories
- EMI/EMC Near Field Probe Set Sniffer PBS1 or PBS2 (DC to 6GHz)
Allows straightforward pinpointing and measurement of interference sources from DC to 6GHz in electronic component groups as well as execution and monitoring of generic EMC measuremen. Our near field probe set sniffer includes a total of 5 probes: 4 magnetic field probes and one electric field probe. You can find detailed information of the products on there shop page.
- 1m, 5m or 10m Low Loss SMA Cable
High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.
- 20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.
- DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN to be destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.
- Calibration Resistor (SMA)
Necessary to calibrate the SPECTRAN V4 noise-floor. The calibration resistor is a MUST-HAVE for any professional user! You can find more product information in our shop.
- Calibration Certificate
For the pro user. Includes a detailed calibration sheet. More information about the article in our online shop.
Downloads
Datasheet (pdf) 
Ordersheet / Pricelist 
SPECTRAN HF-6060 V4 X (USB remote controlled version)
USB remote controlled Spectrum Analyzer for the professional user up to 6GHz. Best RF screening incl. real-time remote analyzer software for MAC-OS, Linux, Windows.
Our latest V4 X Analyzer-Generation offer a vastly enhanced feature set with better screening, significantly faster sample time, more dynamic range, better IP3, reduced phase noise and greater demodulation bandwidth compared to the previous V3 series. Our flagship HF-60100 V4 X is even suitable for Pre-Compliance and EMC/EMI tests.
Patented technology:
Based on a patented spectrum analyzer method Aaronia can offer a professional RF measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits etc.
Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 year warranty for all SPECTRAN spectrum analyzer and EMC antennas.
Real-time Spectrum Analyzer software:
All SPECTRAN V4 X units offer a USB interface with real-time remote control to your PC or MAC. The free analyzer software, which is available for MAC OS, Linux and Windows, transforms any SPECTRAN V4 X in a powerful desktop measurement solution with great features (e.g. unlimited display size, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display, recording feature etc.). Please have a look at the latest version of our software at our Software Development Website.
Limits measurement:
The included software offers a powerful limits display including limits line, percentage display, multiple windows feature, recording and playback etc. Spectrum analyzers with this high-end feature usually cost thousands of Euro. Just save this costs by using Aaronia V4 X analyzers.
Antenna included:
The shipment of each SPECTRAN V4 X already includes a free radial isotropic antenna which covers a frequency range from 700MHz to 2,5GHz. In addition Aaronia provides a lot of optional antennas especially for pre compliance and EMC/EMI tests. Those offer a much higher frequency range (up to 18GHz) and more gain (especially in the frequency range below 700MHz). More details about our antennas can be found at Aaronia Antennas.
Options:
All SPECTRAN V4 X units can be equipped with various options which highly expand the functionality. More details about possible options for this SPECTRAN are available at above section "Options".
Included in delivery:
Each SPECTRAN will be shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".
