Handheld Spectrum Analyser SPECTRAN HF-6080 V4

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²
  (dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM
• Input: 50 Ohm SMA RF-input (f)
• Accuracy: +/- 2dB (typ.)
• Interface: USB 2.0/1.1
• Dimensions (L/W/D): 250x86x27 mm
• Weight: 430gr
• Warranty: 10 years

Highlights:

• Very small size and low weight
• Exposure limit calculation and display according to DIN/VDE 0848
• Up to 100x faster sample time as V3 units
• Up to 70dB higher sensitivity as V3 units
• Low noise preamplifier (option)
• 14Bit Dual-ADC
• DDC Hardware-Filter
• 150 MIPS DSP (CPU)
• Data Logger (64K), expandable to 1MB (Option 001)
• Enhanced and much sharper LCD display (compared to V3 units)
• Simultaneously displays frequency and signal strength
• Real-time remote control via USB
• High resolution multifunction LCD 
• Vector (I/Q) measurement
• DECT & TimeSlot analyzer
• Real-time Peak Power Detector (option)
• Hold function
• Very light EMC directional antenna HyperLOG 6080 included
• Free MAC OS, Linux and Windows software

Examples for possible analysis and measurements within frequency range (10MHz - 8GHz):

• Radio & TV
• Tetra/BOS
• ISM434
• LTE800
• ISM868
• GSM900
• GSM1800
• GSM1900
• DECT
• UMTS
• WLAN
• Microwave
• Bluetooth
• WiFi
• LTE2.6
• WiMAX
• Directional Radio
• 5GHz WLAN
• etc.

• Handheld Spectrum Analyser HF-6080 V4
• HyperLOG 6080 EMC measurement antenna
• Pistol grip with mini tripod function
• 1m SMA cable
• SMA adapter (m/m)
• SMA tool
• SPECTRAN 1300mAh rechargeable battery (integrated)
• Battery charger and power supply incl. international adapter set
• Large aluminum carrying case with foam protection
• Detailed English manual (on CD)
• Analyzer software for MAC OS, Linux and Windows (on CD)

• Option 001 (1MB Memory Expansion)
  

  This memory expansion is a MUST-HAVE particularly when using the data logger, as the standard capacity can quickly become exhausted in this mode. The memory expansion provides space for more than 10 000 logs, while the standard memory will only last for approximately 100 of them.
  Standard memory size is 64K.

• Option 020 (15dB Low Noise Internal Preamplifier)
  

  This option provides an internal, super low-noise 15dB preamplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a TRUE RF switch. There really is no excuse for not ordering this one, considering its very attractive price. The maximum sensitivity of the V4 series without option 020 is lower by 15dB.

• Option UBBV1, 40dB Low Noise External Broadband Preamplifier (1MHz-1GHz)
  

  This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.

• Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1kHz-8GHz)
  

  This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.

• Option 204 (8GHz Broadband Peak Power Meter for HF-6080 (X))
  

  This option expands your SPECTRAN with a Peak Power Meter with full 8GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also an perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm.

• Option 015 - Acoustic output of the signal strength
  

  The Option 015 provides an acoustic representation of the signal intensity, similar to a Geiger counter. This allows a fast and convenient localization of the signal sources. Perfectly suitable for signal direction finding, finding hidden transmitters or aligning antennas, especially in combination with the Peak Power Meter (Option 20 X).
  As a highlight, the dynamic can be adapted optimally by moving the reference level.

• 3000mAh Lithium Polymer (LiPo) Power-Battery
  

  Offers a MUCH higher operation time for your SPECTRAN (up to 400%). Highly recommended for autonomic measurement.
  The 1300mAh standard battery will be replaced. You can find more product details in our online store.

• USB Cable (Special Version)
  

   To connect your SPECTRAN to the PC. Special version with high performance EMC-ferrite. Highly recommended for PC use. You can find more product details in our online store.

• Outdoor Rubber Protection for SPECTRAN Analyzers
  

  Protect and personalize your SPECTRAN with a sturdy rubber case and keep it scratch-n-dent free. Allows full access to all functions. Highly recommended for outdoor usage. You can find more product details in our online store.

• Pistol Grip / Miniature Tripod
  

  Detachable handle with super-practical tripod mode. It is attachable to the backside of the SPECTRAN and allows a more comfortable hand held usage or a perfect desktop stand (e.g. during PC-connection while using our analyzer software). You can find more product details in our online shop.

• Heavy Multifunctional Pistol Grip
  

  Highly recommended for the usage of our HyperLOG antennas: Quick and easy change of antenna polarization, perfect antenna handling (even with the more heavy HyperLOG 40xx and 30xxx series). A MUST-HAVE for any pro user. You can find more product details in our online shop.

• 12V Car Power Adapter
  

  Charges your SPECTRAN or UBBV preamplifier through the cigarette lighter. Recommended for the mobile use of the SPECTRAN Spectrum Analyzer. You can find more product details in our online store.

• 1m, 5m or 10m Low Loss SMA Cable
  

  High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.

• 20dB SMA Attenuator
  

  Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.

• DC-Blocker (SMA)
  

  The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN to be destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.

• Calibration Resistor (SMA)
  

  Necessary to calibrate the SPECTRAN V4 noise-floor. The calibration resistor is a MUST-HAVE for any professional user! You can find more product information in our shop.

• Heavy Plastic Carrying Case
  

  Shock resistant, heavy version with foam protection. Offers space for 2 SPECTRAN units with all accessories and a HyperLOG 70xx or 60xx antenna. A MUST have for the pro user or outdoor usage. You can find detailed information about the product in our online store.

• Calibration Certificate
  

  For the pro user. Includes a detailed calibration sheet. More information about the article in our online shop.

Datasheet (pdf)

Ordersheet / Pricelist

Frequency Charts