Outdoor RF Spectrum Analyzer SPECTRAN HF-XFR
Technical data
- Frequency range: 1MHz to 9,4GHz
- DANL: -170dBm(1Hz)
- Max. power: +20dBm (opt. +40dBm)
- Lowest sample time: 5mS
- Resolution (RBW): 200Hz to 50MHz
- EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
- Units: dBm, dBµV, V/m, A/m, W/m²
dBµV/m, W/cm² etc. - Detectors: RMS, Min/Max
- Demodulator: AM, FM, PM, GSM
- Low noise Preamp: Integrated
- Input: 50 Ohm SMA RF-input (f)
- Accuracy: +/- 1dB (typ.)
- Dimensions (L/W/D): 257x353x56 mm
- Weight: 5kg
- Warranty: 2 years
Highlights integrated Spectrum Analyzer:
- Including Option 002 (high accurate 0,5ppm TCXO timebase)
- Including Option 020 (15dB internal low noise preamplifier, switchable)
- 14Bit Dual-ADC
- DDC Hardware-Filter
- 150 MIPS DSP (CPU)
- Vector (I/Q) measurement
- Real-time Peak Power Detector (option)
- Internal speaker
- Included HyperLOG 60100 EMC directional antenna
- Included OmniLOG 90200 radial isotropic antenna
Highlights Outdoor Notebook:
- Exclusive Ballistic Armor Protection System to meet and exceed real world and military standards MIL-STD-810F
- PrimoSeal technology with highest Ingress protection rating (IP65)
- Prozessor: Intel Core 2 Duo P8700 (2,53GHz, 1.066MB, 6MB)
- Monitor: 14,1" (1280x800) with webcam
- Memory: 4096MB (2x2048) 800MHz DDR2 Dual Channel
- Hard Disk: 128GB shock absorbance solid state drive
- Battery: primary 6 cell 54Wh LI-ION
- Operating system: Windows 7
Application examples
Examples for possible analysis and measurements within frequency range (1MHz - 9,4GHz):
- Pre-Compliance-Test
- Radio & TV
- Tetra/BOS
- ISM434
- LTE800
- ISM868
- GSM900
- GSM1800
- GSM1900
- DECT
- UMTS
- WLAN
- Microwave
- Bluetooth
- WiFi
- LTE2.6
- WiMAX
- Directional Radio
- 5GHz WLAN
- PAR Radar
- etc.
Included in delivery
- HF-XFR RF Outdoor Spectrum Analyzer
- incl. Option 002 (high accurate 0,5ppm TCXO timebase)
- incl. Option 020 (15dB internal low noise preamplifier, switchable)
- MCS Spectrum Analysis Software (installed)
- HyperLOG 60100 EMC directional antenna (black)
- OmniLOG 90200 radial isotropic antenna
- Pistol grip with mini tripod function
- 1m SMA cable
- SMA tool
- Rechargeable battery (installed)
- Battery charger
- English manual (on CD)
Options
- Option UBBV1, 40dB Low Noise External Broadband Preamplifier (1MHz-1GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.
- Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1kHz-8GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.
- Option 205 (10GHz Broadband Peak Power Meter for HF-60100 V4 (X))
This option expands your SPECTRAN with a Peak Power Meter with full 10GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also an perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm. By adding our 20dB attenuator (see price list), the maximum measurable signal level can be enhanced to +30dBm.
Accessories
- EMI/EMC Near Field Probe Set Sniffer PBS1 or PBS2 (DC to 6GHz)
Allows straightforward pinpointing and measurement of interference sources from DC to 6GHz in electronic component groups as well as execution and monitoring of generic EMC measuremen. Our near field probe set sniffer includes a total of 5 probes: 4 magnetic field probes and one electric field probe. You can find detailed information of the products on there shop page.
- UBBV1 40dB External Low Noise Broadband Preamplifier (1MHz-1GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance. You can find more details in our online shop.
- UBBV2 40dB External Low Noise Broadband Preamplifier (DC-8GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance. You can find more information in our online store.
- 1m, 5m or 10m Low Loss SMA Cable
High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.
- 20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.
- DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN to be destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.
- Calibration Resistor (SMA)
Necessary to calibrate the SPECTRAN V4 noise-floor. The calibration resistor is a MUST-HAVE for any professional user! You can find more product information in our shop.
- Calibration Certificate
For the pro user. Includes a detailed calibration sheet. More information about the article in our online shop.
Downloads
Datasheet (pdf) 
Ordersheet / Pricelist 
The World Novelty: SPECTRAN HF-XFR (Military standard outdoor Spectrum Analyzer)
Based on the SPECTRAN HF-60100 V4 X the SPECTRAN HF-XFR was designed and engineered for the use in difficulty conditions, e. g. military operations, building sites, mines, navigation and aviation, etc.
It offers a powerful, shock-resistant Outdoor-Laptop and a highly sensitive Spectrum Analyzer in one compact device. With this analyzer you will master all challenges even at pounding rain, extreme temperatures, blowing dust and dirt. The HF-XFR runs with our latest highly professional MCS-Analyzer-Software.
Patented technology:
Based on a patented spectrum analyzer method Aaronia can offer a professional RF measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits etc.
Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 2 year warranty on all XFR Spectrum Analyzer and 10 year warranty for EMC antennas.
Real-time Spectrum Analyzer software:
All SPECTRAN HF-XFR units run our latest analyzer software. It transforms the SPECTRAN HF-XFR in a powerful desktop measurement solution with great features (e.g. unlimited display size, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display, recording feature etc.). Please have a look at the latest version of our software at our Software Development Website.
Limits measurement:
The included software offers a powerful limits display including limits line, percentage display, multiple windows feature, recording and playback etc. Spectrum analyzers with this high-end feature usually cost thousands of Euro. Just save this costs by using Aaronia XFR analyzers.
Antennas included:
The shipment of each SPECTRAN HF-XFR already includes a radial isotropic antenna which covers a frequency range from 700MHz to 2,5GHz and a directional antenna with a frequency range of 680MHz-10GHz. In addition Aaronia provides a lot of optional antennas especially for pre compliance and EMC/EMI tests. Those offer even more gain (especially in the frequency range below 700MHz). More details about our antennas can be found at Aaronia Antennas.
Options:
All SPECTRAN HF-XFR units can be equipped with various options which highly expand the functionality. More details about possible options for this SPECTRAN are available at above section "Options".
Included in delivery:
Each SPECTRAN will be shipped with many accessories. More details can be found at above section "Included in delivery".
