Aaronia RF USB Spectrum-Analyzer up to 9,4GHz SPECTRAN HF-60100 V4 X

Side view RF USB Spectrum Analyzer SPECTRAN X-Series

RF SMA port view of the RF USB Spectrum Analyzer SPECTRAN X-Series

RF USB X-Series Spectrum Analyzer with included OmniLOG RF-Antenna

Included in delivery

  • RF USB Spectrum Analyzer HF-60100 V4 X
  • OmniLOG 90200 antenna
  • Aluminum carrying case
  • Battery charger and power supply incl. international adapter set
  • USB cable
  • SMA tool
  • Cleaning brush
  • Detailed English manual (on CD)
  • Analyzer software for MAC OS, Linux and Windows (on CD)

Application examples

Examples for possible analysis and measurements within frequency range (1MHz/9kHz - 9,4GHz):

  • Pre-Compliance-Test
  • Radio & TV
  • Tetra/BOS
  • ISM434
  • LTE800
  • ISM868
  • GSM900
  • GSM1800
  • GSM1900
  • DECT
  • UMTS
  • WLAN
  • Microwave
  • Bluetooth
  • WiFi
  • LTE2.6
  • WiMAX
  • Directional Radio
  • 5GHz WLAN
  • PAR Radar
  • etc.

Options

  • Option 900 (9kHz frequency extension)
    Extends the start frequency to 9 kHz. The new, usable frequency range with Option 900 is 9kHz - 9.4 GHz. Perfect for the measurement of conducted emissions according to interference standards such as EN55015, EN61800-3 etc.
  • Option 002 (0,5ppm TCXO Time Base)

     This highly precise TCXO timebase, which has been especially developed for the SPECTRAN, offers significantly reduced phase noise (jitter). It will allow the use of the far narrower filters (down to 200Hz), which will in turn vastly enhance sensitivity. To fully exploit the maximum sensitivity of the HF-60100 V4, this option is indispensable! Furthermore, the TXCO timebase allows far more accurate frequency measurement and display and is therefore a MUST-HAVE for future applications like time-domain measurements or code-selective measurement of UMTS, all already in development.
    The standard accuracy without option 002 is 50ppm.

  • Option 020 (15dB Low Noise Internal Preamplifier)

    This option provides an internal, super low-noise 15dB preamplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a TRUE RF switch. There really is no excuse for not ordering this one, considering its very attractive price. The maximum sensitivity of the V4 series without option 020 is lower by 15dB.

  • Option UBBV1, 40dB Low Noise External Broadband Preamplifier (1MHz-1GHz)

    These external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at  EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer these broadband amplifiers are a MUST HAVE to get the best performance.

  • Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1MHz-10GHz)

    These external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer these broadband amplifiers are a MUST HAVE to get the best performance.

  • Option 205 (10GHz Broadband Peak Power Meter for HF-60100 V4 (X))

    This option expands your SPECTRAN with a Peak Power Meter with full 10GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also an perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm. By adding our 20dB attenuator (see price list), the maximum measurable signal level can be enhanced to +30dBm.

Accessories

  • EMI/EMC Near Field Probe Set Sniffer PBS1 or PBS2 (DC to 9GHz)

    Allows straightforward pinpointing and measurement of interference sources from DC to 9GHz in electronic component groups as well as execution and monitoring of generic EMC measurement. Our near field probe set sniffer includes a total of 5 probes: 4 magnetic field probes and one electric field probe. You can find detailed information of the products on there shop.

  • 1m, 5m or 10m Low Loss SMA Cable

    High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.

  • 20dB SMA Attenuator

    Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.

  • DC-Blocker (SMA)

    The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.

  • Calibration Resistor (SMA)

    Necessary to calibrate the SPECTRAN V4 noise-floor. The calibration resistor is a MUST-HAVE for any professional user! You can find more product information in our shop.

  • Calibration Certificate

    For the pro user. Includes a detailed calibration sheet. More information about the article in our online shop.

Downloads

Initiates file download
frequency range of the spectrum analyzer
€ 1,498.00*
(9kHz - 9,4GHz)
loading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading images

Technical data

  • Frequency range: 1MHz (9kHz with Option 900) to 9,4GHz
  • DANL: -155dBm(1Hz)
  • DANL with Preamp: -170dBm(1Hz)
  • Max. power: +20dBm (opt. +40dBm)
  • Lowest sample time: 5mS
  • Resolution (RBW): 200Hz to 50MHz
  • EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
  • Units: dBm, dBµV, V/m, A/m, W/m²
    dBµV/m, W/cm² etc.
  • Detectors: RMS, Min/Max
  • Demodulator: AM, FM, PM, GSM
  • Input: 50 Ohm SMA RF-input (f)
  • Accuracy: +/- 1dB (typ.)
  • Interface: USB 2.0/1.1
  • Dimensions (L/W/D): 210x136x26 mm
  • Weight: 1600gr
  • Warranty: 10 years

 

Highlights:

  • Exposure limit calculation and display according to DIN/VDE 0848
  • Up to 100x faster sample time than V3 units
  • Up to 60dB higher sensitivity than V3 units
  • Low noise preamplifier (option)
  • 14Bit Dual-ADC
  • DDC Hardware-Filter
  • 150 MIPS DSP (CPU)
  • Real-time remote control via USB
  • Vector (I/Q) measurement
  • Real-time Peak Power Detector (option)
  • Internal speaker (which can be switched off)
  • Audio out for the use of PC based FFT analyzer software
  • Included OmniLOG antenna
  • Very thick (3mm) aluminium housing offering very good screening.
  • 100% powered by the external power supply only (no battery)
  • Free MAC OS, Linux and Windows software

 

SPECTRAN HF-60100 V4 X (USB controlled Version)

 

Our definitive flagship. THE 9.4GHz RF USB Spectrum Analyzer for the "pro" at an incredible price incl. real-time USB Analyzer-Software for MAC-OS, Linux, Windows. Supports up to +40dBm RF input power to meet any Pre-Compliance measurement.

 

NEW: 9kHz frequency extension (Option 900)
The Option 900 extends the effective frequency range to 9kHz - 9.4GHz, a bandwidth which could previously only offer considerably more expensive spectrum analyzers.

 

Our latest V4 generation offer a vastly enhanced feature set with significantly faster sample time, more dynamic range, better IP3, reduced phase noise and greater demodulation bandwidth compared to the previous V3 series. The V4 flagship HF-60100 V4 X is suitable for Pre-Compliance and EMC/EMI tests. Its incredibly high -170dBm sensitivity (1Hz @ 3.6009GHz with preamp) sets it worlds apart from even its most current and extremely expensive competitors! But see yourself.

 

Patented technology:

Based on a patented spectrum analyzer method Aaronia can offer a professional RF measurement at a spectacular price level.

Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits etc.

 

Made in Germany:

All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all SPECTRAN spectrum analyzers and EMC antennas.

 

Real-time USB Spectrum Analyzer software:

All SPECTRAN V4 X units offer a USB interface with real-time USB remote control to your PC or MAC. The free USB analyzer software, which is available for MAC OS, Linux and Windows, transforms any SPECTRAN V4 X into a powerful desktop measurement solution with great features (e.g. unlimited display size, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display, recording feature etc.). Please have a look at the latest version of our software at our Software Development Website

 

Limits measurement:

The included software offers a powerful limits display including limits line, percentage display, multiple windows feature, recording and playback etc. Spectrum analyzers with this high-end feature usually cost  thousands of Euro. Just save this cost by using Aaronia V4 X analyzers.

 

Antenna included:

The shipment of each SPECTRAN V4 X already includes a free radial isotropic antenna which covers a frequency range from 700MHz to 2,5GHz. In addition Aaronia provides a lot of optional antennas especially for pre compliance and EMC/EMI tests. Those offer a much higher frequency range (up to 18GHz) and more gain (especially in the frequency range below 700MHz). More details about our antennas can be found at Aaronia Antennas

 

Options:

All SPECTRAN V4 X units can be equipped with various options which highly expand the functionality. More details about possible options for this SPECTRAN are available at above section "Options".

 

Included in delivery:

Each SPECTRAN will be shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".