Examples for possible analysis and measurements within frequency range (1Hz - 30MHz):
This memory expansion is a MUST-HAVE particularly when using the data logger, as the standard capacity can quickly become exhausted in this mode. The memory expansion provides space for more than 10 000 logs, while the standard memory will only last for approximately 100 of them.
Standard memory size is 64K.
These external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer these broadband amplifiers are a MUST HAVE to get the best performance.
This top-grade geomagnetic field sensor provides the ability to conduct geophysical assessments and measurement of geomagnetic field anomalies. However, it can also be used to turn the instrument into a Gaussmeter, measuring the difference between field strengths (static fields) of permanent magnets. Thanks to its ISOTROPIC (3D) construction, measurements can be performed in all three spacial dimensions at once (or separately). The sensitivity is about 10nT-600T.
This 20MHz frequency extension option vastly enhances the frequency range of the NF-5030. Amongst others, it brings the ADSL and 13.56MHz RFID frequency bands in range. The maximum frequency range of the NF-5030 without option 008 is 1MHz.
Option 009 provides a significantly higher resolution for the optional 3D magnetic field sensor for measurement of static magnetic fields (option 006). It is absolutely mandatory for geomagnetic surveys. The standard resolution of the NF-5030 without option 009 is 14Bit.
Our 30MHz frequency option extends the frequency range of the NF-5030 or NF-XFR to the absolute maximum. The new frequency range is 1kHz to 30MHz. Amongst others, it even allows measurement of VDSL2. The higher clock frequency of the DDC provided by this option is a MUST-HAVE for technicians and authorities needing accurate measurements of signal sources up to 30MHz. The maximum frequency of the NF-5030 without option 010 is 1MHz.
Allows straightforward pinpointing and measurement of interference sources from DC to 9GHz in electronic component groups as well as execution and monitoring of generic EMC measurement. Our near field probe set sniffer includes a total of 5 probes: 4 magnetic field probes and one electric field probe. You can find detailed information of the products on there shop.
The ADP1 offers a potential free measurement and also expands the measurement range up to 240V. Signals will not be influenced (potential free measurement). Protects the SPECTRAN Spectrum Analyzer input against high voltages up to 1400V (CAT3). A "must have" for direct cable-measurements of DSL, ADSL, VDSL, free running oszillators, mains etc.. More details in our onlie shop.
The highly sensitive GEO vibration sensors offer a surprisingly high sensitivity within a wide frequency range down to 4Hz. They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits. More information about the product in our online shop.
Offers a MUCH higher operation time for your SPECTRAN (up to 400%). Highly recommended for autonomic measurement.
The 1300mAh standard battery will be replaced. You can find more product details in our online shop.
To connect your SPECTRAN to the PC. Special version with high performance EMC-ferrite. Highly recommended for PC use. You can find more product details in our online shop.
Protect and personalize your SPECTRAN with a sturdy rubber case and keep it scratch-n-dent free. Allows full access to all functions. Highly recommended for outdoor usage. You can find more product details in our online shop.
Detachable handle with super-practical tripod mode. It is attachable to the backside of the SPECTRAN and allows a more comfortable hand held usage or a perfect desktop stand (e.g. during PC-connection while using our analyzer software). You can find more product details in our online shop.
The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.
Shock resistant, heavy version with foam protection. Offers space for 2 SPECTRAN units with all accessories and a HyperLOG 70xx or 60xx antenna. A MUST have for the pro user or outdoor usage. You can find detailed information about the product in our online shop.
For the pro user. Includes a detailed calibration sheet. More information about the article in our online shop.
SPECTRAN NF-5030 S
High power version of the NF-5030. Suitable for Pre-Compliance and EMC/EMI tests up to 30MHz. Wide range of additional options to optimize the analyzer functionality. Full measurement range for DIN/VDE 0848 (Occupational).
Based on a patented spectrum analyzer method Aaronia can offer a professional EMF measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits and boost the functionality by using our high-end PC software.
All NF SPECTRAN units are equipped with our award winning REAL 3D (isotropic) magnetic sensor. In 2009 the magazine "Elektronik" (Europes most comprehensive magazine on electronics) honored the Aaronia REAL 3D sensor as "Product Of The Year" in the category "Passive Electronic Parts".
Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 yeard warranty for all SPECTRAN spectrum analyzers.
Real-time Spectrum analyzer software (included for FREE):
All SPECTRAN units offer a USB interface with real-time remote control to your PC or MAC. The free analyzer software, which is available for MAC OS, Linux and Windows, transforms any SPECTRAN into a powerful measurement solution with great features (e.g. recording, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display etc.). Please have a look at the latest version of our software at our software development website.
All SPECTRAN units offer a powerful limits display. Just push the limits button at our Spectrum Analyzer and the high-performance Digital Signal Processor (DSP) of the SPECTRAN constantly calculates the limits and displays the results in real-time. Spectrum analyzers with this high-end feature usually cost thousands of Euro. Just save this costs by using Aaronia analyzers.
All EMF NF SPECTRANs include our award winning 3D (isotropic) sensor to measure magnetic fields and a field plate sensor to measure electric fields. Both sensors cover the full frequency range of the SPECTRAN unit.
All SPECTRAN units can be equipped with various options which highly expand the functionality. More details about possible options for this SPECTRAN are available at above section "Options".
Included in delivery:
Each SPECTRAN will be shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".