Military Spectrum Analyzer SPECTRAN NF-XFR
Technical data
- Frequency: 1Hz to 20MHz (30MHz)
- Analog Input 200nV to 200mV (typ.)
- Resolution (RBW): 0,3Hz to 10MHz
(1-3-10 step) - Units: Volt
- Detectors: RMS, Min/Max
- Demodulator: AM, FM
- Input: High impedance SMA input (f)
- Audio: Internal speaker with volume control
- Accuracy: 3% (typ.)
- Dimensions (L/W/D): 257x353x56 mm
- Weight: 5kg
- Warranty: 2 years
Highlights:
- Internet flash software updates
- High-performance DSP (Digital Signal Processor)
- Internal speaker (which can be switched off)
Highlights Notebook:
- Exclusive Ballistic Armor Protection System to meet and exceed real world and military standards MIL-STD-810F
- PrimoSeal technology with highest Ingress protection rating (IP65)
- Prozessor: Intel Core 2 Duo P8700 (2,53GHz, 1.066MB, 6MB)
- Monitor: 14,1" (1280x800) with webcam
- Memory: 4096MB (2x2048) 800MHz DDR2 Dual Channel
- Hard Disk: 128GB shock absorbence solid state drive
- Battery: primary 6 cell 54W/HR
- Operating system: Windows 7
Application examples
Examples for possible analysis and measurements within frequency range (1Hz - 30MHz):
- Traction power
- Power lines and cables
- Transformer
- Power supplies and harmonics
- Energy saving light bulbs
- Switching power supplies
- TFT and LCD monitors and TVs
- 135kHz RFID
- DSL
- ADSL
- VDSL
- 13,56MHz RFID
- Various home appliances, industry and office up to 30MHz
Included in delivery
- NF-XFR Outdoor Spectrum Analyzer
- MCS Analysis Software (installed)
- SMA tool
- Rechargeable battery (installed)
- Battery charger
- English manual (on CD)
Options
- Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1kHz-8GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.
- Option 010 (30MHz Frequency Extension)
Our 30MHz frequency option extends the frequency range of the NF-5030 or NF-XFR to the absolute maximum. The new frequency range is 1kHz to 30MHz. Amongst others, it even allows measurement of VDSL2. The higher clock frequency of the DDC provided by this option is a MUST-HAVE for technicians and authorities needing accurate measurements of signal sources up to 30MHz. The maximum frequency of the NF-5030 without option 010 is 1MHz.
Accessories
- EMI/EMC Near Field Probe Set Sniffer PBS1 or PBS2 (DC to 6GHz)
Allows straightforward pinpointing and measurement of interference sources from DC to 6GHz in electronic component groups as well as execution and monitoring of generic EMC measuremen. Our near field probe set sniffer includes a total of 5 probes: 4 magnetic field probes and one electric field probe. You can find detailed information of the products on there shop page.
- Active Differential Probe ADP1 (DC to 30MHz)
The ADP1 offers a potential free measurement and also expands the measurement range up to 240V. Signals will not be influenced (potential free measurement). Protects the SPECTRAN Spectrum Analyzer input against high voltages up to 1400V (CAT3). A "must have" for direct cable-measurements of DSL, ADSL, VDSL, free running oszillators, mains etc.. More details in our onlie shop.
- Vibrationssensor / Geofon GEO10 & GEO14 (4Hz bis 1kHz)
The highly sensitive GEO vibration sensors offer a surprisingly high sensitivity within a wide frequency range down to 4Hz. They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits. More information about the product on there shop page.
- UBBV2 40dB External Low Noise Broadband Preamplifier (DC-8GHz)
This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance. You can find more information in our online store.
- 1m, 5m or 10m Low Loss SMA Cable
High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.
- 20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.
- DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN to be destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.
- Calibration Certificate
For the pro user. Includes a detailed calibration sheet. More information about the article in our online shop.
Downloads
Datasheet (pdf) 
Ordersheet / Pricelist 
The Worldnovelty: SPECTRAN NF-XFR (Military standard outdoor Spectrum Analyzer)
Based on the SPECTRAN NF-5030 X the SPECTRAN NF-XFR was designed and engineered for the use in difficulty conditions, e. g. military operations, building sites, mines, navigation and aviation, etc.
It offers a powerful, shock-resistant Outdoor-Laptop and a highly sensitive Spectrum Analyzer in one compact device. With this analyzer you will master all challenges even at pounding rain, extreme temperatures, blowing dust and dirt. The NF-XFR runs with our latest highly professional MCS-Analyzer-Software.
Patented technology:
Based on a patented spectrum analyzer method Aaronia can offer a professional measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits etc.
Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 2 year warranty on all XFR Spectrum Analyzer and 10 year warranty for EMC antennas.
Real-time Spectrum Analyzer software:
All SPECTRAN NF-XFR units run our latest analyzer software. It transforms the SPECTRAN NF-XFR in a powerful desktop measurement solution with great features (e.g. unlimited display size, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display, recording feature etc.). Please have a look at the latest version of our software at our Software Development Website.
Options:
All SPECTRAN NF-XFR units can be equipped with various options which highly expand the functionality. More details about possible options for this SPECTRAN are available at above section "Options".
Included in delivery:
Each SPECTRAN will be shipped with many accessories. More details can be found at above section "Included in delivery".
