Extremly stable Spectrum Analyzer SPECTRAN NF-XFR PRO

Included in delivery

  • SPECTRAN NF-XFR PRO Outdoor Spectrum Analyzer
  • incl. Option 005 (12Bit DDC frequency filter)
  • incl. Option 008 (20MHz frequency extension)
  • MCS Spectrum Analysis Software (installed)
  • SMA tool
  • Rechargeable battery (installed)
  • Battery charger 
  • English manual (on CD)

Application examples

Examples for possible analysis and measurements within frequency range (1Hz - 30MHz):

  • Traction power
  • Power lines and cables 
  • Transformer
  • Power supplies and harmonics
  • Energy saving light bulbs
  • Switching power supplies
  • TFT and LCD monitors and TVs
  • 135kHz RFID
  • DSL
  • ADSL
  • VDSL
  • 13,56MHz RFID
  • Various home appliances, industry and office up to 30MHz

Options

  • Option 010 (30MHz Frequency Extension)

     Our 30MHz frequency option extends the frequency range of the NF-5030 or NF-XFR to the absolute maximum. The new frequency range is 1kHz to 30MHz. Amongst others, it even allows measurement of VDSL2. The higher clock frequency of the DDC provided by this option is a MUST-HAVE for technicians and authorities needing accurate measurements of signal sources up to 30MHz. The maximum frequency of the NF-5030 without option 010 is 1MHz.

Accessories

  • EMI/EMC Near Field Probe Set Sniffer PBS1 or PBS2 (DC to 9GHz)

    Allows straightforward pinpointing and measurement of interference sources from DC to 9GHz in electronic component groups as well as execution and monitoring of generic EMC measurement. Our near field probe set sniffer includes a total of 5 probes: 4 magnetic field probes and one electric field probe. You can find detailed information of the products on there shop.

  • 1m, 5m or 10m Low Loss SMA Cable

    High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.

  • 20dB SMA Attenuator

    Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.

  • DC-Blocker (SMA)

    The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.

  • UBBV-NF-25, 25dB External Low Noise Broadband Preamplifier (1Hz-60MHz)

    This external super low-noise preamplifier has a broad frequency range and high 25dB gain, enabling maximum performance particularly when measuring extremely weak signals in the frequency range of 1Hz - 60MHz. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifier is a MUST HAVE to get the best performance. You can find more information in our online shop.

  • UBBV-NF-35, 35dB External Low Noise Broadband Preamplifier (1Hz-30MHz)

    This external super low-noise preamplifier has a broad frequency range and high 35dB gain, enabling maximum performance particularly when measuring extremely weak signals in the frequency range of 1Hz - 30MHz. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifier is a MUST HAVE to get the best performance. You can find more information in our online shop.

  • Active Differential Probe ADP1 (DC to 30MHz)

    The ADP1 offers a potential free measurement and also expands the measurement range up to 240V. Signals will not be influenced (potential free measurement). Protects the SPECTRAN Spectrum Analyzer input against high voltages up to 1400V (CAT3). A "must have" for direct cable-measurements of DSL, ADSL, VDSL, free running oszillators, mains etc.. More details in our onlie shop.

  • Vibrationssensor / Geofon GEO10 & GEO14 (4Hz ~ 1kHz)

    The highly sensitive GEO vibration sensors offer a surprisingly high sensitivity within a wide frequency range down to 4Hz. They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits. More information about the product in our online shop.

Downloads

Initiates file download
frequency range of the spectrum analyzer
€ 11,980.00*
(1Hz - 30MHz)
loading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading images

Technical data

  • Frequency range: 1Hz to 20MHz (30MHz)
  • Typ. level range: 200nV to 200mV
  • Typ. accuracy: 3%
  • Resolution (RBW): 0,3Hz to 10MHz (1-3-10 step)
  • Detectors: RMS, Min/Max
  • Demodulator: AM, FM
  • 65 MSPS
  • High-impedance SMA-input
  • Incl. Option 005 (12 Bit DDC) and 008 (20MHz frequency expansion)
  • Dimensions (L/W/D): 257x353x56 mm
  • Weight: 5kg
  • Warranty: 2 years

 

Highlights notebook

  • Ultra Rugged Outdoor Spectrum Analyzer (IP65, -20°C) with built-in notebook
  • Extra-large 15.6 " widescreen display (Full HD, 1920x1080) with Multi-touch screen, sunlight readable (800 Nits QuadraClear)
  • Processor: Intel i7- 620M (4M Cache, 2.66 GHz, 3.33 GHz max with Intel Turbo Boost Technology) with 8GB RAM
  • Built-in GPS receiver
  • Especially suitable for use even under the most difficult conditions
  • HDD: 320GB SATA
  • Operating System: Windows 7 64 bit Professional
  • Battery: Smart Li-ion Battery (8700mAh)
  • Expansion slots: 2x PCMCIA Type II, 1x ExpressCard/54, 1 x Smart Card Reader I/O interface: 2x Serial port (9-pin, D -Sub), 1x External VGA port (15-pin, D -Sub), 1x microphone, 1x audio output (mini-jack), 1x DC input, 3x USB 2.0 (4 pin), 1x USB 2.0 / eSATA combo, 2x LAN (RJ45), 1x HDMI, 1x docking connector (80 - pin)
  • Communication interfaces: 10/100/1000 BASE -T Ethernet Intel Centrino Advanced-N 6200, 802.11 a/b/g/n, GPS module + Tri - Passtrough
  • Safety Features: Intel vPro technology, TPM1.2, fingerprint scanner, smart card reader, Kensington Lock
  • Certification robustness: MIL -STD- 810G, IP65, MIL -STD- 461F, magnesium alloy casing, shock-proof removable hard drive, protection against vibration and shocks
  • Temperature range: Operating -20 °C to +55 °C, Storage : -40 °C to +71 °C
  • Humidity: 95% relative humidity, non-condensing

BUILT TO SURVIVE! SPECTRAN NF-XFR PRO

 

The SPECTRAN NF-XFR PRO has been specifically designed for use in harsh conditions such as for military use, aerospace, mining, construction, research and development, even in the pouring rain , extreme temperatures and extremely dusty and dirty environments.

With this Spectrum Analyzer you can master all the challenges. It provides a powerful, extremely impact resistant Outdoor notebook as well as a high-end spectrum analyzer in one compact device. The NF-XFR PRO has been independently tested in accordance with MIL -STD- 810G , IP65 and MIL -STD- 461F.

The analyzer is based on a novel and patented by Aaronia method of spectrum analysis. The locating of interference sources and their causes , the determination of frequency and signal strength measurement and evaluation conform to the most complex limits - all this allows the SPECTRAN NF-XFR PRO .

EMF measurement at the highest level


The XFR PRO offers a huge variety of helpful functions for spectrum analysis:

A variety of trigger function, unlimited number of markers, a variety of views: (Spectrum, Waterfall, Histogram, limits, time domain, results), Unlimited number of limits e.g. EN55011, EN55022, ICNIRP etc. including display of limit lines and limit bar graphs, multi-window support and much more ...


Unmatched Performance

The powerful and ultra-stable Spectrum Analyzer is the first outdoor Spectrum Analyser its class with an Intel ® i7 processor with 8GB RAM, full HD multi - touch screen, integrated GPS and ultra- low noise level of up to 200nV. The NF-XFR PRO is rugged and powerful at the same time .

Made in Germany

All SPECTRAN XFRs are developed in Aaronia in Germany, individually produced and calibrated. This guarantees the highest quality standards.
 
Preinstalled Real Time Spectrum Analyzer Software

All SPECTRAN XFR are equipped with the latest software that turns the XFR into a powerful, multi-functional solution for EMF/EMC measurements of all kinds. The software solution also includes a recording and playback function, simultaneous display of multiple spectran, histogram function, waterfall display, unlimited number of markers, complex limit indicator etc.

Options

The functionality of the SPECTRAN XFR PRO can be greatly expanded with various options again . More information can be found above under "Options".

Scope of delivery

Each SPECTRAN comes with a variety of accessories. More details about delivery can be found above under "Included in delivery".