Ultra Rugged Outdoor Spectrum Analyzer SPECTRAN HF-XFR PRO

Included in delivery

  • SPECTRAN HF-XFR PRO Outdoor Spectrum Analyzer
  • incl. Option 002 (high accurate 0,5ppm TCXO timebase)
  • incl. Option 020 (15dB internal low noise preamplifier, switchable)
  • MCS Spectrum Analysis Software (installed)
  • HyperLOG 60100 EMC directional antenna (black)
  • OmniLOG 90200 radial isotropic antenna
  • Pistol grip with mini tripod function
  • 1m SMA cable
  • SMA tool
  • Rechargeable battery (installed)
  • Battery charger 
  • English manual (on CD)

Application examples

Examples for possible analysis and measurements within frequency range (1MHz/9kHz - 9,4GHz):

  • Pre-Compliance-Test
  • Radio & TV
  • Tetra/BOS
  • ISM434
  • LTE800
  • ISM868
  • GSM900
  • GSM1800
  • GSM1900
  • DECT
  • UMTS
  • WLAN
  • Microwave
  • Bluetooth
  • WiFi
  • LTE2.6
  • WiMAX
  • Directional Radio
  • 5GHz WLAN
  • PAR Radar
  • etc.

Options

  • Option 900 (9kHz frequency extension)
    Extends the start frequency to 9 kHz. The new, usable frequency range with Option 900 is 9kHz - 9.4 GHz. Perfect for the measurement of conducted emissions according to interference standards such as EN55015, EN61800-3 etc.
  • Option 015 - Bug Sniffer (Audio Signal Tracker)

    The Option 015 provides an acoustic representation of the signal intensity, similar to a Geiger counter. This allows a fast and convenient localization of the signal sources. Perfectly suitable for signal direction finding, finding hidden transmitters or aligning antennas, especially in combination with the Peak Power Meter (Option 20 X).
    As a highlight, the dynamic can be adapted optimally by moving the reference level.

  • Option 205 (10GHz Broadband Peak Power Meter for HF-60100 V4 (X))

    This option expands your SPECTRAN with a Peak Power Meter with full 10GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also an perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm. By adding our 20dB attenuator (see price list), the maximum measurable signal level can be enhanced to +30dBm.

  • Option 501 (1mW Red Laser)

    Easy to connect on top of any HyperLOG X antenna. Including connector and all needed screws. Perfect for pinpointing any RF source within 100m range e.g. inside buildings.

  • Option 502 (Tactical 150mW Green Power-Laser)

    Extreme military grade. Easy to connect on top of any HyperLOG X antenna. Including connector and all needed screws. Perfect for pinpointing any RF source even at bright daylight. About 1000x times brighter than our standard 1mW red laser. Very high range up to 15 km.
    WARNING: Only for outside use. This is no toy! Please make sure that you are allowed to use and/or import this gadget before placing an order!

  • Option 510 (Small Compass Ball)

    Great gadget to localize a pinpointed RF source. Works at any antenna position due to its liquid filled ball. Can be used together with above mentioned laser or separately. Including connector and all needed screws.

  • Option 530 (Waterproof Housing)

    Protects the antenna against water intrusion. Perfect for outdoor use e.g. in the pouring rain. (+€ 49.95)

  • Option UBBV1, 40dB Low Noise External Broadband Preamplifier (1MHz-1GHz)

    These external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at  EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer these broadband amplifiers are a MUST HAVE to get the best performance.

  • Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1MHz-10GHz)

    These external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer these broadband amplifiers are a MUST HAVE to get the best performance.

Accessories

  • EMI/EMC Near Field Probe Set Sniffer PBS1 or PBS2 (DC to 9GHz)

    Allows straightforward pinpointing and measurement of interference sources from DC to 9GHz in electronic component groups as well as execution and monitoring of generic EMC measurement. Our near field probe set sniffer includes a total of 5 probes: 4 magnetic field probes and one electric field probe. You can find detailed information of the products on there shop.

  • Heavy Multifunctional Pistol Grip

    Highly recommended for the usage of our HyperLOG antennas: Quick and easy change of antenna polarization, perfect antenna handling (even with the more heavy HyperLOG 40xx and 30xxx series). A MUST-HAVE for any pro user. You can find more product details in our online shop.

  • 1m, 5m or 10m Low Loss SMA Cable

    High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.

  • 20dB SMA Attenuator

    Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.

  • DC-Blocker (SMA)

    The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.

  • Calibration Resistor (SMA)

    Necessary to calibrate the SPECTRAN V4 noise-floor. The calibration resistor is a MUST-HAVE for any professional user! You can find more product information in our shop.

  • Calibration Certificate

    For the pro user. Includes a detailed calibration sheet. More information about the article in our online shop.

  • UBBV1 40dB External Low Noise Broadband Preamplifier (1MHz-1GHz)

    This external super low-noise preamplifier has a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifier is a MUST HAVE to get the best performance. You can find more details in our online shop.

  • UBBV2 40dB External Low Noise Broadband Preamplifier (1MHz-10GHz)

    This external super low-noise preamplifier has a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifier is a MUST HAVE to get the best performance. You can find more information in our online shop.

  • UBBV-NF-25, 25dB External Low Noise Broadband Preamplifier (1Hz-60MHz)

    This external super low-noise preamplifier has a broad frequency range and high 25dB gain, enabling maximum performance particularly when measuring extremely weak signals in the frequency range of 1Hz - 60MHz. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifier is a MUST HAVE to get the best performance. You can find more information in our online shop.

  • UBBV-NF-35, 35dB External Low Noise Broadband Preamplifier (1Hz-30MHz)

    This external super low-noise preamplifier has a broad frequency range and high 35dB gain, enabling maximum performance particularly when measuring extremely weak signals in the frequency range of 1Hz - 30MHz. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifier is a MUST HAVE to get the best performance. You can find more information in our online shop.

Downloads

Initiates file download
frequency range of the spectrum analyzer
€ 12,980.00*
(9kHz - 9,4GHz)
loading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading images

Technical data

  • Frequency range: 1MHz (9kHz with Option 900) to 9,4GHz
  • DANL: -170dBm(1Hz)
  • Max. power: +20dBm (opt. +40dBm)
  • Lowest sample time: 5mS
  • Resolution (RBW): 200Hz to 50MHz
  • EMC filter: 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHz
  • Units: dBm, dBµV, V/m, A/m, W/m²
    dBµV/m, W/cm² etc.
  • Detectors: RMS, Min/Max
  • Demodulator: AM, FM, PM
  • Low noise Preamp: Integrated
  • Input: 50 Ohm SMA RF-input (f)
  • Accuracy: +/- 1dB (typ.)
  • Dimensions (L/W/D): 257x353x56 mm
  • Weight: 5kg
  • Warranty: 2 years

 

Highlights Spectrum Analyzer

  • Including Option 002 (high accurate 0,5ppm TCXO timebase)
  • Including Option 020 (15dB internal low noise preamplifier, switchable)
  • 14Bit Dual-ADC
  • DDC Hardware-Filter
  • 150 MIPS DSP (CPU)
  • Vector (I/Q) measurement
  • Real-time Peak Power Detector (option)
  • Internal speaker
  • Included HyperLOG 60100 EMC directional antenna
  • Included OmniLOG 90200 radial isotropic antenna

 

Highlights notebook

  • Ultra Rugged Outdoor Spectrum Analyzer (IP65, -20°C) with built-in notebook
  • Extra-large 15.6 " widescreen display (Full HD, 1920x1080) with Multi-touch screen, sunlight readable (800 Nits QuadraClear)
  • Processor: Intel i7- 620M (4M Cache, 2.66 GHz, 3.33 GHz max with Intel Turbo Boost Technology) with 8GB RAM
  • Built-in GPS receiver
  • Especially suitable for use even under the most difficult conditions
  • HDD: 320GB SATA
  • Operating System: Windows 7 64 bit Professional
  • Battery: Smart Li-ion Battery (8700mAh)
  • Expansion slots: 2x PCMCIA Type II, 1x ExpressCard/54, 1 x Smart Card Reader I/O interface: 2x Serial port (9-pin, D -Sub), 1x External VGA port (15-pin, D -Sub), 1x microphone, 1x audio output (mini-jack), 1x DC input, 3x USB 2.0 (4 pin), 1x USB 2.0 / eSATA combo, 2x LAN (RJ45), 1x HDMI, 1x docking connector (80 - pin)
  • Communication interfaces: 10/100/1000 BASE -T Ethernet Intel Centrino Advanced-N 6200, 802.11 a/b/g/n, GPS module + Tri - Passtrough
  • Safety Features: Intel vPro technology, TPM1.2, fingerprint scanner, smart card reader, Kensington Lock
  • Certification robustness: MIL -STD- 810G, IP65, MIL -STD- 461F, magnesium alloy casing, shock-proof removable hard drive, protection against vibration and shocks
  • Temperature range: Operating -20 °C to +55 °C, Storage : -40 °C to +71 °C
  • Humidity: 95% relative humidity, non-condensing

BUILT TO SURVIVE! SPECTRAN HF-XFR PRO

 

The SPECTRAN HF-XFR PRO has been specifically designed for use in harsh conditions such as for military use, aerospace, mining, construction, research and development, even in the pouring rain , extreme temperatures and extremely dusty and dirty environments.

With this Spectrum Analyzer you can master all the challenges. It provides a powerful, extremely impact resistant Outdoor notebook as well as a high-end spectrum analyzer in one compact device. The HF-XFR PRO has been independently tested in accordance with MIL -STD- 810G , IP65 and MIL -STD- 461F.

The analyzer is based on a novel and patented by Aaronia method of spectrum analysis. The locating of interference sources and their causes , the determination of frequency and signal strength measurement and evaluation conform to the most complex limits - all this allows the SPECTRAN HF-XFR PRO .

RF measurement at the highest level


The XFR PRO offers a huge variety of helpful functions for spectrum analysis:

A variety of trigger function, unlimited number of markers, a variety of views: (Spectrum, Waterfall, Histogram, limits, time domain, results), Unlimited number of limits e.g. EN55011, EN55022, ICNIRP etc. including display of limit lines and limit bar graphs, multi-window support and much more ...


Unmatched Performance

The powerful and ultra-stable Spectrum Analyzer is the first outdoor Spectrum Analyser its class with an Intel ® i7 processor with 8GB RAM, full HD multi - touch screen, integrated GPS and ultra- low noise level - 170dBm to (1Hz) DANL. The HF-XFR PRO is rugged and powerful at the same time .

Made in Germany

All SPECTRAN XFRs are developed in Aaronia in Germany, individually produced and calibrated. This guarantees the highest quality standards.
 
Preinstalled Real Time Spectrum Analyzer Software

All SPECTRAN XFR are equipped with the latest software that turns the XFR into a powerful, multi-functional solution for RF measurements of all kinds. The software solution also includes a recording and playback function, simultaneous display of multiple spectran, histogram function, waterfall display, unlimited number of markers, complex limit indicator etc.

Including antennas


The SPECTRAN HF-XFR PRO comes including an omnidirectional antenna (700MHz -2,5GHz) and a loop antenna (680MHz - 10GHz). In addition Aaronia has many optional antennas especially for pre-compliance and EMC testing in our product range. These offer a higher frequency range (up to 18GHz) and more profit (especially in the frequency range below 700 MHz). More details can be found under antennas.

Options

The functionality of the SPECTRAN XFR PRO can be greatly expanded with various options again . More information can be found above under "Options".

Scope of delivery

Each SPECTRAN comes with a variety of accessories. More details about delivery can be found above under "Included in delivery".