Notifications
Clear all
Topic starter
31/08/2010 9:12 am
If your SPECTRAN shows no display after a firmware crash please use this instruction to reset it:
- Unplug the batterie
Unplug the power supply
Connect the SPECTRAN with the PC via USB cable
Connect the power supply again to the SPECTRAN
Press ENTER and ON at the same time on the SPECTRAN. The SPECTRAN will now connect to the PC but the SPECTRAN will show no display. If it dosent connect try above stepps again untill it connects. You might also need to use/test several USB ports because this might also cause the problem of "no connection".
Finaly update the firmware again and it should work fine. Do NOT! use the LCS software for the firmware update!
Activate factory reset in the menu of the SPECTRAN[/list:u:3rktnmor]
Snip
Share: