Greeting,
One question please.
How is it possible that the same recorded *. ldt file when the load shows two different spectrum in two different computers?...significantly different!
Settings are the same on both machines..all is the same...
If you want to leave me a email or I will throw on PM both spectrum images and *. ldt file
LCS Spectrum Analyzer (HF) Version 2.0.0.1
SPECTRAN® HF-2025E (700MHz to 2,5GHz)
Radial Isotropic Broadband-Antenna OmniLOG® 90200 (700MHz-2,5GHz)
scanprofile.ini
...
[2 MTS GSM900 SRB]
StartFreq = 939.5
StopFreq = 949.1
Sweeptime = 500
Pulsemode = 1
ResBW = 300 kHz
VidBW = 3 MHz
FrequencyData = GSM900 Frequency List
...
Thanks in advance.
There MUST be a difference in some settings otherwise you would see the same spectrum since the recorded data are identical.
Snip