Aaronia RSA - Agilent Vee Pro - Demo project  

  RSS

stm
 stm
(@stm)
Member Admin
Joined: 10 years ago
Posts: 4
23/04/2015 10:30 am  

How to use the Aaronia RSA (with EMF-Monitor software) / SNDK with the Agilent Vee Pro software.

Here you can find an Agilent Vee Pro demo project. This solution connects to a RSA/SNDK device and reads the incoming TCP/IP data packages. The project is a very simple demo without any optimizations and it doesn't support all functionalities of the RSA. It can be used as an example to prepare a connection to the remote device.

How to use the demo project.
- install the Agilent Vee Pro version 9 or greater.
- start up your RSA device
- download the project source ( http://spectran-developer.net/ftp/software/source/AaroniaRSA-AgilentVee-Demo.zip )
- open the aaronia-rsa.vee file in the Agilent Vee software.
- press the "play" button in the Agilent software

The project file has a default IP / Port configuration. Please make sure that your RSA device is running on these settings. If you are using an other IP configuration, you have the possibility to change the settings in the Agilent Vee project. You can find a description in the RSAv2-AgilentVee.pdf documentation located in the project archive.

Please note that we can't give any support in using the Agilent Vee software!


Quote
Share: