Notifications
Clear all

Aaronia RSA - NI LabView - Demo project

2 Posts
2 Users
0 Likes
9,529 Views
 stm
(@stm)
New Member Admin
Joined: 14 years ago
Posts: 4
Topic starter  

How to use the Aaronia RSA (with EMF-Monitor software) / SNDK with the National Instrument LabView.

Here you can find a NI LabView demo project. This solution connects to a RSA/SNDK device and reads the incoming TCP/IP data packages. The project is a very simple demo without any optimizations and it doesn't support all functionalities of the RSA. It can be used as an example to prepare a connection to the remote device.

How to use the demo project.
- install the NI LabView software.
- start up your RSA device
- download the project source ( http://spectran-developer.net/ftp/software/source/AaroniaRSA-LabView-Demo.zip )
- open the RSA.lvproj file in the LabView software.
- press the "play" button in the LabView software

The project file has a default IP / Port configuration. Please make sure that your RSA device is running on these settings. If you are using an other IP configuration, you have the possibility to change the settings in the LabView project. You can find a description in the RSAv2-LabView.pdf documentation located in the project archive.

Please note that we can't give any support in using the LabView software!


   
Quote
(@alberto12)
New Member
Joined: 2 years ago
Posts: 1
 

Austin, Dallas, San Antonio, and Houston are served by Squeezed Online, a privately held company. They use the most commonly accepted method of juice extraction. To physically "squeeze" the juice out of fruits and vegetables, a hydraulic press applies over 1000 pounds of pressure. The technique is very delicate, and it requires a lot more time and work than other common methods of extracting juice, thus it extracts the most nutrients from a fruit or vegetable. Their methods have been shown to create fruit and vegetable juice with higher vitamin, mineral, and nutrient retention than most other juicing methods.  


   
ReplyQuote
Share: