German
French
Spanish
Korean
Portuguese
Reference Antenna 20MHz to 6GHz HyperLOG 20600 EMI
Included in delivery
- HyperLOG 20600 EMI test antenna for EMC/EMI tests
- Specified calibration data & calibration certificate
Application examples
Examples for possible analysis and measurements within frequency range (20MHz - 6GHz):
- Professional EMI and Pre-Compliance-Test even for very low signals
- Radio & TV
- Tetra/BOS
- ISM434
- LTE800
- ISM868
- GSM900
- GSM1800
- GSM1900
- DECT
- UMTS
- WLAN
- Microwave
- Bluetooth
- WiFi
- LTE2.6
- WiMAX
- 5GHz WLAN
- etc.
Options
- Option 502 (Tactical 150mW Green Power-Laser)
Extreme military grade. Easy to connect on top of any HyperLOG X antenna. Including connector and all needed screws. Perfect for pinpointing any RF source even at bright daylight. About 1000x times brighter than our standard 1mW red laser. Very high range up to 15 km.
WARNING: Only for outside use. This is no toy! Please make sure that you are allowed to use and/or import this gadget before placing an order!
Accessories
- 1m, 5m or 10m Low Loss SMA Cable
High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.
- SMA to N Adapter
To connect any Spectrum Analyzer etc. with N connector to the HyperLOG antenna (Above SMA cable needed). You can find more details in our online shop.
- Heavy Tripod for EMI antenna series
High stability. HIGHLY recommended for usage with HyperLOG EMI antennas. You can find detailed information in our online shop.
Downloads
Datasheet (pdf) 
Ordersheet / Pricelist 
Technical data
- Compatible with any Spectrum Analyzer brand
- Design: Biconical & Logarithmic-Periodic (combination)
- Frequency range: 20MHz to 6GHz
- Max. input power: 310W AM
- Immunity test field strength: 10V/m
- Nominal impedance: 50 Ohm
- Accuracy: 0,3dB
- VSWR: <2:1 (typ.)
- Gain: 8dBi (typ.)
- Antenna factor: See data sheet graph
- RF connection: N (f) or SMA (see optional adapter)
- Dimensions (L/W/D):
1300 x 1170 x 595 mm - Weight: 6,5kg
- Warranty: 3 years
Highlights:
- Ultra high professional EMC/EMI pre-compliance test antenna. Meets the latest EMI/EMC standards from 2011 up to 6GHz
- Very high accuracy to be used as a reference antenna
- Suitable for immunity measurements
- Includes exhaustive calibration data
- High quality rubber paint for perfect antenna protection
- Ultra wide bandwidth
- Very high gain over the total frequency range
- Coverage of various mobile radio frequency ranges
- Perfectly suitable for field-strength and EMC measurements due to high precision
- Can be used in the lab and for open-field application
HyperLOG 20600 EMI
Ultimate EMC/EMI pre-compliance test antenna for the pro user. Unmatched ultra high accuracy. Very high gain over the full frequency range. Meets latest EMI/EMC standards up to 6GHz.
The HyperLOG 20600 EMI is Aaronia's latest antenna development and meets all needs for the latest EMC standards which are expanded to 6GHz since 2011. Combines the advantages of a biconical antenna and those of a log periodic antenna in a single high end EMC/EMI antenna. Offers an extremely high accuracy of 0.3 dB over the full specified frequency range and therefore can even be used as reference antenna.
By using the HyperLOG EMI antennas, the common EMI and EMC measurement error-rates, which show up by switching between different test antennas, are avoided. This is because you have only to use one antenna for the complete frequency range instead of two ore more antennas. This saves significant costs since the measuring time is reduced drastically.
The HyperLOG EMI series can also be used as a powerful broadcasting antenna with up to 310 watts. These antennas are suitable even for immunity measurements, where very high field strengths are needed by more than 10 V/m.
Every HyperLOG EMI antenna goes through rigorous testing in our laboratories before dispatch and is equipped with a high quality rubber paint which offers protection against mechanical damage and environmental influence.
Made in Germany:
All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all EMC/EMI antennas.
Exhaustive Calibration data:
All Aaronia HyperLOG EMC/EMI antennas include a complete high resolution calibration data set with an unmatched number of calibration points (on CD). This offers the ability to make a very accurate EMC measurement with any Spectrum Analyzer.
Options:
All HyperLOG EMC/EMI antennas can be equipped with various options which highly expand the functionality. More details about possible options are available at above section "Options".
