E & H Near Field Probe Set Sniffer DC to 9GHz with EMC Preamplifier PBS2

25mm Near Field Probe for magnetic fields incl. 1/4

Near Field Probe Set Sniffer with UBBV2 broadband preamplifier and SMB cable

Aaronia Probeset incl. 5 probes for magnetic and electric fields

Magnetic probe locating H-Field Emissions Source

PBS probe connected to field strength meter NF-5030

Magnetic sniffer attached to included mini tripod

Included in delivery

  • 1 x 50mm magnetic (H) field probe PBS-H4
  • 1 x 25mm magnetic (H) field probe PBS-H3
  • 1 x 12mm magnetic (H) field probe PBS-H2
  • 1 x 6mm magnetic (H) field probe PBS-H1
  • 1 x stub electric (E) field probe PBS-E1
  • UBBV2 EMC broad band RF Preamplifier
  • 2 mounting brackets for SPECTRAN
  • LiPo-Battery (integrated in UBBV2)
  • Battery charger and power supply for UBBV2 broad band PreAmp incl. international adapter set
  • SMA tool
  • Cleaning brush
  • Aluminum carrying case with foam protection
  • Pistol grip with mini tripod function
  • SMB to SMA cable (1m)
  • Typical calibration data and Excel sheet for dBm to V/m (electric field), A/m, T and G (magnetic field) conversion (on CD)

Application examples

Examples for possible analysis and measurements within frequency range (DC - 9GHz):

  • Finding sources of EMC emissions problems or injecting fields into circuits to identify those which are EMC-susceptible.
  • Pre-Compliance-Test
  • Traction power
  • Power lines and cables 
  • Transformer
  • Power supplies and harmonics
  • Energy saving light bulbs
  • Switching power supplies
  • TFT and LCD monitors and TVs
  • 135kHz RFID
  • DSL
  • ADSL
  • VDSL
  • 13,56MHz RFID
  • Radio & TV
  • Tetra/BOS
  • ISM434
  • LTE800
  • ISM868
  • GSM900
  • GSM1800
  • GSM1900
  • DECT
  • UMTS
  • WLAN
  • Microwave
  • Bluetooth
  • WiFi
  • LTE2.6
  • WiMAX
  • 5GHz WLAN
  • etc.


  • Currently there are no additional options available.


  • 1m or 3m SMB to SMA Cable

    High quality special SMB to SMA cable for connecting any Probe with various test equipment like different Spectrum-Analyzers, Oscilloscopes, RF receiver/transmitter etc. (following N to SMA adapter required). (Optional in Probe Sets)

  • Heavy Multifunctional Pistol Grip

    Highly recommended for the usage of our HyperLOG antennas: Quick and easy change of antenna polarization, perfect antenna handling (even with the more heavy HyperLOG 40xx and 30xxx series). A MUST-HAVE for any pro user. You can find more product details in our online shop.

  • Large Aluminum Tripod

    Height adjustable, high stability. HIGHLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas.You can find detailed information in our online shop.

  • SMA to N Adapter

    To connect any Spectrum Analyzer etc. with N connector to the HyperLOG antenna (Above SMA cable needed). You can find more details in our online shop.



Ordersheet / Pricelist


Frequency Charts


Free Aaronia Probe-Set Power Converter at the AppStore:


iPhone Version


iPad Version

UBBV2 Broadband RF Preamplifier DC to 8GHz

25mm Magnetic Field Probe incl. quick-connect SMB plug

Initiates file download
frequency range of the antenna
€ 2,498.00*
(DC-1Hz - 9GHz)
loading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading imagesloading images

Technical data

  • Near Field Probes compatible with any Spectrum Analyzer or Measurement Receiver
  • Design: Active E & H near field probes
  • Frequency range: DC (1Hz) to 9GHz
  • Nominal impedance: 50 Ohm
  • Preamplifier: UBBV2 (40dB, 1kHz to 10GHz)
  • Gain: Depending on probe (see data sheets)
  • Antenna factor: Depending on probe (see data sheets)
  • RF connection: SMB (m) or SMA (see optional adapter)
  • Tripod connection: 1/4"
  • Warranty: 10 years



  • 5 different near field probes to measure H and E fields offer optimum sensitivity and spatial resolution at different frequencies
  • Passive or active mode by removing/adding included preamplifier
  • Preamplifier with integrated LiPo battery (up to 3,5h run time)
  • Covered with insulating layer for safe measurements
  • Very handy design incl. rubber coated grip
  • Very small size. Perfect for exact locating of interference sources. Offers access to tight spaces
  • Integrated electrostatic shield eliminates common-mode pickup
  • Can be driven by a signal source to generate fields for electromagnetic susceptibility testing
  • Gain rises very linear with frequency which offers high accuracy
  • Preamplifier offers integrated calibration data on EEprom (readout via integrated USB interface)
  • Typical standard calibration data and Excel sheet for dBm to V/m and A/m conversion (on CD)
  • Extra wide frequency range up to 9GHz
  • Suitable for field-strength and EMC measurements due to high precision
  • Including tripod connector for perfect adjustment and reproducibility




Active high performance E & H Near Field Probes incl. 40dB EMC RF preamplifier with wide frequency range up to 9GHz. High accuracy. Integrated probe tripod connection for perfect adjustment.


The Aaronia EMC probe set, which fits to any Spectrum Analyzer or Oscilloscope brand, allows straightforward pinpointing and measurement of interference sources from DC (1Hz) to 9GHz in electronic component groups as well as execution and monitoring of generic EMC measurement.
Our sniffer set includes a total of 5 probes: 4 probes for magnetic field measurement and one for measurement of electric fields.
All probes are covered with an insulating layer, thus allowing safe measurement of oscillators or mains lines.
Perfect for locating interference sources which might have been found e.g. in an EN55011, EN55022 or EN50371 (Class A or Class B) survey. After implementing appropriate changes in the circuit, their efficiency can easily and reliably be verified. That way, expensive and time-consuming re-assessments in an EMC laboratory can be skipped.


Every probe goes through rigorous testing in our laboratories before dispatch and is equipped with a high quality rubber paint which offers protection against mechanical damage and environmental influence, a top-quality integrated tripod connection and an SMB connector.


 Aaronia Probe-Set Power Converter App for iPhone and iPad! (QR-Codes in the Download tab on the left.)

Made in Germany:

All Aaronia-Probes are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all sniffers.


Exhaustive Calibration data:

All Aaronia-Sniffer include a complete high resolution calibration data set with an unmatched number of calibration points and an Excel sheet to calculate dBm reading to V/m (electric field), A/m, T and G (magnetic field). This offers the ability to make a very accurate EMC measurement with any Spectrum Analyzer.