German
French
Spanish
Active Tracking Antenna MDF 50400X
Included in delivery
- Aaronia MDF 50400X Antenna with 40dB preamp & USB power charger
- Pistol grip with miniature tripod function
- Watertight transport case with foam insert
Application examples
Examples for possible analysis and measurements within frequency range (500kHz - 400MHz):
- Pre-Compliance-Test
- DSL
- ADSL
- VDSL
- 13,56MHz RFID
- CB Radio
- UKW Radio
- Amateur Radio
- BOS
- Tetra
- etc.
Options
Currently there are no additional options available.
Accessories
- 1m, 5m or 10m Low Loss SMA Cable
High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.
- Heavy Multifunctional Pistol Grip
Highly recommended for the usage of our HyperLOG antennas: Quick and easy change of antenna polarization, perfect antenna handling (even with the more heavy HyperLOG 40xx and 30xxx series). A MUST-HAVE for any pro user. You can find more product details in our online shop.
- Large Aluminum Tripod
Height adjustable, high stability. HIGHLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas.You can find detailed information in our online shop.
- SMA to N Adapter
To connect any Spectrum Analyzer etc. with N connector to the HyperLOG antenna (Above SMA cable needed). You can find more details in our online shop.
Downloads
Datasheet (pdf) 
Ordersheet / Pricelist 
Technical data
- Compatible with any Spectrum Analyzer brand
- Design: Loop
- Frequency Range: 500kHz - 400MHz (1MHz - 40MHz with max. +/- 1,0dB deviation)
- Impedance: 50 Ohm
- RF connector: SMA (female)
- Temperature range: - 40°C to +60°C
- Dimensions: (L/W/D): 180 x 180 x 85 mm
- Weight: 360gr
- Incl. Pistol grip with mini tripod function, USB charger & watertight transport case
- Warranty: 10 years
Highlights:
- Perfect for magnetic field direction finding in combination with Spectrum Analyzers
- Incl. 40dB pre-amplifier with integrated battery
- Compact Design and low weight
- 10 years warranty and manufactured in Germany
Active Magnetic Field Tracking Antenna Aaronia MDF 50400X
The Aaronia MDF 50400X is a broadband, active magnetic field tracking antenna, suitable for signal tracking and field strength measurements.
Thanks to the high directionality of the antenna, the MDF is ideally suited for signal direction finding.
In contrast to the passive version, the MDF 50400X comes with directly attached 40dB preamplifier. The thus reached extremely high antenna gain allows the measurement of ultra-weak signals.
The preamplifier of the antenna can be operated by an internal battery or by the included USB AC adapter. The battery time is approx. 3-4 hours. The USB connection allows to read out the calibration data of the preamplifier, which are stored in the internal EEPROM and therefore can not be lost.
Made in Germany:
All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all MDF antennas.
Optional Accessories:
Each MDF antenna can be equipped with many accessories. More details can be found at above section "Accessories".
